|
Aquila
Glass School has 3 new classes that are specifically designed for those who
are new to fusing or are unsure of what you can do with Bullseye Art Glass.
Students that have taken our Introduction to Fusing or have equivalent
experience and would like to have some help working through a few projects
will find these new classes very helpful.
Creating an Art Glass Plate
 
Class
Description
So how do
I design an Art Glass plate any way? In this class, Rae will help you design
your own Art Glass plate. You will be discussing the size of your piece, its
final shape, what colors go best with other colors, what things to look out
for, how to make the best use of Opalescent and Transparent Bullseye glass,
and the assembly of all your cut pieces. The size of the piece you’ll be
making is 8x8.
Prerequisites - Intro to fusing or equivalent experience.
Duration –
2 hours
Class Cost
- $75.00
Teacher –
Rae Campbell
Minimum/Maximum Number of Students - 4/8
Register
for classes by calling 503-240-9449.
A $25 deposit is required to
hold your seat.
Plate
Making with Frit
 
Class
Description
In this
class, Rae will discuss and show you how to design and assemble a plate
using stencils, Bullseye powders and fine frits to get the look you want.
Students are encouraged to bring a favorite stencil to use in this class. A
variety of colors of frits will be available for the students to use. Either
White or French Vanilla Bullseye glass will be available to use as you
bottom layer. The size of the plate you’ll be making is 6x6.
Prerequisites - Intro to fusing or equivalent experience.
Duration –
2 hours
Class
Cost - $75.00
Non-Refundable Deposit - $25
Teacher –
Rae Campbell
Minimum/Maximum Number of Students - 4/8
Register
for classes by calling 503-240-9449.
Fun
with Frit
Class
Description
Frit,
Bullseye Frit, is nothing more than ground up sheet glass. Frit can give you
many different looks and textures. In this class, Rae will discuss and
demonstrate different ways to work with Transparent and Opalescent course
frit. You will be shown how to mix some of the colors together and decorate
your chosen piece or pieces. You will be able to choose from several
different mold shapes for either size glass you work with. You will also be
able to decide whether you want to slump your project(s) right side (face)
up or upside (face) down. Your choices for this class are 1-6x6 or 4-3x3’s.
Each
student will create a 6 x 6 plate, or 4 small 3 x 3 dishes. You decide which
side to slump, right side up, or upside down.
Prerequisites - Intro to fusing or equivalent experience.
Duration –
2 hours
Class Cost
- $50.00
Non-Refundable Deposit - $25
Teacher –
Rae Campbell
Minimum/Maximum Number of Students - 4/8
Register
for classes by calling 503-240-9449.
|
